Car Mechanic Simulator 2018: Order 20 - Bolt Reptilia

This order in Car Mechanic Simulator 2018 requires you to fix the car Bolt Reptilia. Read this chapter to learn how to complete it. Here, you will find a list of spare parts required to complete the order.

• Shopping list
• Walkthrough

Shopping list

Replacement list

Engine:

1. Battery
2. Brake Servo
3. Intake manifold (1 carb)
4. Round Air Filter Base (1 carb)
5. Round Air Filter Cover (1 carb)
6. Round Air Filter (1 carb)
7. Oil Filter (V8 OHV)
8. Fuel Filter
9. Fuel Pomp
10. Carburetor (4-barrel)
11. Engine Head Cover A (V8 OVH)
12. Engine Head Cover B (V8 OVH)
13. Engine Head (V8 OVH) x2
14. Ignition Distribution
15. Ignition Distribution Rotor
16. Rocker Arm x8 (or x16)
17. Valve Push Rod x11 (or x16)
18. Piston with Conrod x5
19. Camshaft (V8 OHV)
20. Spark Plug x5 (or x8)
21. Starter (V8)
22. Gearbox (V8 OHV)
23. Clutch Pressure Plate
24. Clutch Release Bearing
25. Flywheel

Body:

1. Hood
2. Front Bumper
3. Rear Bumper
4. Right Headlight
5. Front Right Fender

Walkthrough

It's better to buy more rocker arms and push rods than necessary

Your next objective is the V8 engine overhaul in the Bolt Reptilia. Additionally, you'll have to change the oil and repair / replace some elements of the body. It's easy to make a mistake when replacing the spark plugs (which is why you should buy 8; they're cheap), and when replacing the pistons install a new one in place of each you've removed as soon as you do it. One thing that can be even more irritating is a mistake when replacing push rods and rocker arms. Once again, buy more than you need (16 instead of 8) and replace them all, just to be sure (the cost is just a few bucks a piece).

Don't forget about the clips on the cap

In case you forgot to install the Clips B - they're the ones holding the Ignition Distribution Cap.

Car Mechanic Simulator 2018

July 28, 2017

Rate It!

• Overview
• Guide