Car Mechanic Simulator 2018: Order 8 - Olsen Grand Club

In Car Mechanic Simulator 2018 in the next order of story, we need to focus on the Olsen Grand Club. Below, you will find information that will allow you to perform this task, including a list of spare parts and a description of the repair.

• Shopping list
• Walkthrough

Shopping list

The list of parts:

Front:

1. Front Shock Absorber Cap x2
2. Upper Suspension Arm x2
3. Double Wishbone Shock Absorber x2
4. Lower Suspension Arm
5. Front Spring x2
6. Front Suspension Crossmember C
7. Steering Rack
8. Front Drive Axle D
9. Front Drive Axle A x2
10. Front Steering Knuckle C x2
11. Front Axle Knuckle Cover x2

Rear:

1. Leaf Spring U-Bolt x4
2. Leaf Spring Plate
3. Solid Axle Control Arm x2
4. Rubber Bushings x2
5. Rear Shock Absorber B x2
6. Rear Spring x2
7. Rear Axle Knuckle Housing C

Extras:

1. Oil Pan (V8)
2. Radiator A
3. Radiator Fan Housing
4. Rims: Modern 06, 20', ET:0 (front) x2

A new feature - you'll need to replace the following body parts:

1. Front Bumper
2. Front Left Headlight
3. Front Left Fender
4. Front License Plate

Walkthrough

The test track remains locked until you've replaced the oil pan

A task that often proves to be problematic. The new car is built from different parts (remember to buy the required parts rather than repeat the order seen in the previous jobs), while the suspension layout differs a little bit in comparison to the previous jobs. You can test the vehicle yourself by taking it to a Path Test - the Test Track is unavailable until you've bought and replaced the Oil Pan (V8).

Take a look at the engine and remove the radiator and its cover, then lift the car on one of the lifts. The chassis, steering system, and certain parts of the powertrain are damaged - skip the brakes, as these are in a good condition. Replacing the parts shouldn't be difficult - almost all of the contracted elements are heavily rusted, while the rest of the car is in a decent condition - the damaged parts are clearly visible. Nevertheless, there are two things that are easily missed - you have to disassemble the shock absorbers and replace the Absorber Caps (nr.1 on your parts list) as well as two front rims. Remove the tires and use the computer to buy the following model: Modern 06, size 20' (ET:0) (front). Finish up by performing an oil drain and replace it with a new one.

This shop offers body parts

Time to take care of the body. Visit the shop dedicated to body parts and input the name of the vehicle into the browser in the upper right part of the screen to display all parts for the given make. Consult your list and buy the parts detailed in the list at the beginning of this chapter. You also need to buy a front license plate which can be found in a different shop (that offers license plates exclusively). Choose any plate that you see fit.

The white outlines can merge with other elements and disappear - be sure to check for each element individually

Use the white outlines to install the required body fragments. Sadly, some of the outlines can disappear when shadowing at a solid object - check for each element individually.

Install the parts by approaching the vehicle and choosing Assembly Mode from the wheel menu. All missing parts are lit in white. You may experience some problems with seeing the outlines of the missing windows. Don't forget about the rear license plate (very easy to miss).

Car Mechanic Simulator 2018

July 28, 2017

Rate It!

• Overview
• Guide