Car Mechanic Simulator 2018: Order 32 - Castor Earthquake

This story order in Car Mechanic Simulator 2018 requires repairing a Castor Earthquake. Below, you will find information that will help you successfully restore the vehicle to full functionality.

• Shopping list
• Walkthrough

Shopping list

Replacement list:

Engine and brakes:

1. Air Filter
2. 2x Fuel Rail DI
3. Oil Filter (V8)
4. Throttle (V8)
5. 5x Spark Plug
6. 5x Ignition Coil
7. 2x Engine Head (V8)
8. Brake Servo
9. ABS Module
10. ABS Pump
11. 4x Brake Pads
12. 4x Brake Disc
13. 4x Brake Disc Ventilated
14. 4x Brake Caliper

Transmission and front suspension:

1. Gearbox (V8)
2. Clutch Pressure Plate
3. Clutch Release Bearing
4. Starter (V8)
5. Transfer Case (4x4)
6. Front Drive Axle D
7. Front Drive Axle A
8. 2x Front Drive Axle A
9. Drive Shaft
10. Front Drive Shaft B
11. Steering Rack
12. 2x Inner Tie Rod
13. 2x Outer Tie Rod
14. 2x Front Steering Knuckle C

Rear suspension:

1. 2x Leaf Spring
2. 2x Leaf Spring Plate
3. 4x Leaf Spring U-Bolt
4. 2x Small Rubber Bushing
5. Leaf-Spring Rear Drive Axle
6. 2x Rear Shock Absorber B
7. 2x Rear Axle Knuckle Housing C
8. 2x Solid Rear Drive Axle

Walkthrough

The second ignition spark and coil from the right are in good condition and can be put back

No real difficulties here. You have to replace ignition plugs and coils. On the side of the brake servo replace the two middle ones, and on the side of the battery - all but the second from the right (see above). Mind the rear suspension as well: mount the small rubber bushings only on the back of the leaf springs.

Car Mechanic Simulator 2018

July 28, 2017

Rate It!

• Overview
• Guide