Car Mechanic Simulator 2014: Order 12 - Revton Van

CAR: Revton Van

TARGETS:

• Change oil filter
• Change the oil

REWARD: 200 USD

PARTS:

• Oil filter - 50 USD
• Oil change - 100 USD + cost of the new oil: ca. 10 USD

Your client orders replacement of the oil filter and pouring a new oil to the oil pan - that is very quick order. Begin with change of the oil filter:

• Raise Hood and go to Engine - inspect view mode.
• Turn on the Disassemble Mode.
• Remove Oil Filter Cap.
• Remove Oil Filter.
• Turn on the Assemble Mode.
• Put in the new Oil Filter.
• Put on Oil Filter Cap.

Oil filter is not big but very important element of car.

Oil change is a little more complicated operation. Use Car Lifter and go to Engine - inspect mode with view from below. Then:

1. Find Oil Pan at the bottom of the engine.
2. Find Oil Drain Plug, twist off and flush the old oil.
3. Lower the car with Car Lifter and go to Engine - inspect view mode.
4. Twist off Engine Oil Fill Plug.
5. Click on the oil jerrycan and pour the oil to the engine for a few seconds.
6. Put out Oil Dipstick and check level of oil - point that connects gold and silver field should be as close to the scale's middle as possible.

Until you pour the new oil you must first flush the old liquid.

Car Mechanic Simulator 2014

January 24, 2014

Rate It!

• Overview
• Guide