Car Mechanic Simulator 2014: Order 3 - Revton Van

CAR: Revton Van

TARGETS:

• Perform a test drive
• Replace all worn out parts

REWARD: 300 USD

PARTS:

• Sway Bar End Link Left - 50 USD
• Sway Bar End Link Right - 50 USD
• Outer Tie Rod - 100 USD

During drive on a bumpy road your client suddenly heard a strange knocking sound from the front wheels - your job is to remove the cause of that sound. Accordingly to the guidelines, begin with the test drive. After doing that three problems will be marked - with sway bar end link left and right and with outer tie rod.

Sway bars are placed near the shock absorbers.

Take care of sway bar end link left and outer tie rod placed by the left wheel:

1. Go to the Wheel - inspect view mode.
2. Turn on the Disassemble Mode.
3. Twist off Revton Van Left Wheel.
4. Remove Brake Caliper.
5. Remove both Brake Pads.
6. Remove Sway Bar End Link Left.
7. Remove Outer Tie Rod.
8. Turn on the Assemble Mode.
9. Assemble new Outer Tie Rod.
10. Assemble new Sway Bar End Link Left.
11. Assemble Brake Pads.
12. Assemble Brake Caliper.
13. Assemble Revton Van Wheel.

Replace of the sway bar end link requires disassembling a few wheel elements.

Do exactly the same with the front right wheel (except of replacing the outer tie rod).

Car Mechanic Simulator 2014

January 24, 2014

Rate It!

• Overview
• Guide