Car Mechanic Simulator 2014: Order 36 - Sceo LC500

CAR: Sceo LC500

TARGETS:

1. Find and eliminate the cause

REWARD: 1200 USD

PARTS:

• Air Flow Meter - 450 USD
• Air Flow Tube V6 - 150 USD
• Oil change - 100 USD + cost of the new oil: ca. 10 USD

Change of the air elements in cars with V6 engines requires disassembling of the engine cover.

Driver has noticed significant decrease of the engine's power - find the cause and possible solution for that problem. In that order perform the OBD Link Test and then turn on the Show parts conditions mode. Take a look under the hood with the Engine - inspect option - you should replace Air Flow Meter and Air Flow Tube V6. Purchase new copies and begin the replacement:

1. Remove Plastic Engine Cover V6.
2. Remove Air Flow Tube V6.
3. Remove Air Flow Meter and assemble a new copy.
4. Assemble new Air Flow Tube V6.

Leave Plastic Cover Engine V6 removed for now - as it turns out, you have problem with the oil as well and you have to change it as quick as you can:

• Use the Car Lifter and go to the view of the engine from below with the Engine - inspect option.
• Find Oil Pan located at the bottom of the engine.
• Find Oil Drain Plug, twist it off and flush the old oil.
• Lower the car with the Car Lifter and go to the Engine - inspect view mode.
• Twist off Engine Oil Fill Plug.
• Click on the oil jerrycan and pour the oil to the engine for a few seconds.
• Put out Oil Dipstick and check level of oil - point that connects gold and silver field should be as close to the scale's middle as possible.
• Assemble Plastic Cover Engine V6.

There couldn't be better oil change!

Car Mechanic Simulator 2014

January 24, 2014

Rate It!

• Overview
• Guide