Car Mechanic Simulator 2014: Order 50 - Revton Wind

CAR: Revton Wind

TARGETS:

• Find the solution
• Perform Chip Tuning min. 10%

REWARD: 2000 USD

PARTS:

• Fuel Filter - 80 USD
• Fuel Pump - 320 USD
• Air Filter - 35 USD
• Water Pump - repair ca. 130 USD, new part 300 USD

Customer is complaining about too high fuel consumption - as probably reasons he indicates a problem with some part or insufficient optimization which you can improve through the chip tuning. So, if we have problem with the consumption, we need to replace the Fuel Filter and the Fuel Pump. Buy new parts and take care of their replacement:

1. Raise the car with the Car Lifter and go to the view of the rear chassis with the Undercarriage - inspect option.
2. Turn on the Disassemble Mode.
3. Find Fuel Filter on the Fuel Tank and remove it.
4. Find Fuel Pump on the Fuel Tank and twist it off.
5. Turn on the Assemble Mode.
6. Assemble new Fuel Filter.
7. Assemble new Fuel Pump.

The air filter is well protected by the solid cover.

Another thing that should be replaced becomes Air Filter:

1. Remove Air Flow Tube.
2. Remove Air Flow Meter.
3. Remove Air Filter Cover.
4. Put out worn-out Air Filter and assemble a new one.
5. Assemble Air Filter Cover.
6. Assemble Air Flow Meter.
7. Assemble Air Flow Tube.

Also Water Pump should be changed - you can repair it or buy a new part:

1. Remove Serpentine Belt.
2. Remove Belt Tensioner.
3. Remove Timing Belt.
4. Remove Water Pump and go to the Assemble Mode.
5. Assemble new Water Pump.
6. Assemble Timing Belt.
7. Assemble Belt Tensioner.
8. Assemble Serpentine Belt.

Second part of the order is the chip tuning - you have to achieve at least 10% power increase. Go to the appropriate room (with the Roller Dyno - tune car option) and start the tuning application - Program Eeprom.

Car Mechanic Simulator 2014

January 24, 2014

Rate It!

• Overview
• Guide