Car Mechanic Simulator 2014: Order 29 - Revton Wind

CAR: Revton Wind

TARGETS:

• Examine shock absorbers and springs

REWARD: 1000 USD

PARTS:

• 2x Suspension Spring Rear - 300 USD
• 2x Suspension Spring Front - 480 USD

Your client has bought a new car recently but he is complaining about the too hard suspension. He is not certain whether the suspension is in the good condition. Your task is to check which car's elements should be replaced. In the first step examine the car with the Diagnostic Path Test and then turn on the Show parts conditions mode. You will see an unusual thing - all four Suspension Springs should be changed. Purchase two front and two rear springs and start working:

Front suspension springs:

• Twist off and remove Revton Wind Left Wheel.
• Twist off Sway Bar End Link Left.
• Twist off Shock Abs. B Front-Left.
• Remove Suspension Spring Front and assemble a new one.
• Assemble the removed Shock Abs. B Front-Left, Sway Bar End Link Left and screw Revton Wind Left Wheel.

Do exactly the same with the right wheel.

Getting to springs requires you to disassemble almost entire suspension.

Rear suspension springs - right:

1. Twist off Muffler Rear.
2. Twist off Suspension Arm Rear-Right A.
3. Remove broken Suspension Spring Rear and replace it with a new one.
4. Assemble removed Muffler Rear and Suspension Arm Rear-Right A.

Rear suspension springs (left):

1. Twist off Suspension Arm Rear-Left A.
2. Remove broken Suspension Spring Rear and replace it with a new one.
3. Assemble removed Suspension Arm Rear-Left A.

Disassembling of the rear-right suspension spring comes with twisting off the rear muffler.

Car Mechanic Simulator 2014

January 24, 2014

Rate It!

• Overview
• Guide